HI TEMP MASTER PUMP SWITCH 30HTMD1WP

Mechanically-Activated Pump Switch for High Temperature Sump Applications

Features

• Rated for use in liquids up to 200°F (93.3°C)
• Controls pump up to 13FLA, 78 LRA
• Adjustable pumping range of 8-36 inches (20.3-91.4 cm)
• Mechanically-activated to provide reliable alternative for areas restricting the use of mercury
• Twin wall design of float housing (patent pending) protects internal components from heat and moisture
• Pump down applications

Options

• 125V or 250V models
• With or without piggy-back plug
• Various cord lengths

CSA Certified

Five Year Limited Warranty

Specifications

CABLE:

• Flexible 16 gauge, 2 conductor (UL, CSA) SJOOW, water-resistant, (CPE)

FLOAT:

• 3.18 inch diameter x 5.58 inch long (8.1 cm x 14.2 cm), high impact, corrosion resistant, polypropylene housing for use in water up to 200°F (93°C)

MAXIMUM WATER DEPTH:

• 33 feet (10 meters) or 13 PSI (90 kPa)

ELECTRICAL:

• 125 VAC 50/60Hz Single Phase:
• Maximum Pump Running Current: 13 amps
• Maximum Pump Starting Current: 78 amps
• 250 VAC 50/60Hz Single Phase:
• Maximum Pump Running Current: 13 amps
• Maximum Pump Starting Current: 78 amps

NOTE: This switch is not recommended for controlling:

• Electric loads less than 100 milliamps, 12 VAC
• Non-arcing electric loads
  NOTE: This switch must be used with pumps that provide integral thermal overload protection.

5 YEARS WARRANTY