spacer


4" Leaf Eater Advanced Rain Head (San Antonio Tx)

4" Leaf Eater Advanced Rain Head (San Antonio Tx)

Currently Not Available  
Part Number: 9514-RH-RHAD98  
Weight: 4 lbs.  
Ships From: TX  
PDF Drawing: View Technical Drawing  
Manufacturer: Rain Harvesting  
Availability:Out of Stock  
Contact Us  

Leaf Eater Advanced

The Leaf Eater Advanced™ is the next generation Rain Head, featuring the new Clean Shield™ (single screen) technology and VH Pivot™ outlet. The Leaf Eater Advanced™ Rain Head prevents debris from entering the Rain Harvesting system, improves water quality and reduces tank/cistern maintenance.

The single screen incorporates Clean Shield™ technology which deflects leaves and debris away from the flow of water. This minimises maintenance and enhances catchment efficiency. This Rain Head incorporates a VH Pivot™ outlet that swivels to suit vertical or horizontal downspouts. The Leaf Eater Advanced™ can also be used as a debris removing device even when rainwater is not being collected.

Features and Benefits
Compact, versatile rain head for quick and easy installation
Single screen technology for advanced debris shedding (Clean Shield™)
Minimal maintenance
Pivot the outlet to suit vertical or horizontal (rear outlet) downspouts (VH Pivot™)
High flow rate performance
Superior catchment efficiency at low and high flow rates
Single screen with 1/32" aperture mosquito proof stainless steel mesh
Include adaptor for secure connection to downspout

Installation Instructions

Gutter & Mid-Mount Installation

  1. Gutter: Measure 10½” from the bottom of the existing gutter pop and remove this section of downspout. Ensure the cut edge is clean and smooth. Mid-Mount: Remove 10½” of downspout where the Leaf Eater Advanced™ is to be situated. Ensure all cut edges are clean and smooth. (figure 1)
  2. Using the quick release tabs remove the Clean Shield™ screen bylifting it up and then out. (figure 2)
  3. Insert the Leaf Eater Advanced™ by sliding it up over the cut section and then down into position. The Leaf Eater Advanced™ outlet should be slid firmly onto the bottom down pipe until it can be pushed no further. (figure 3)
  4. Screw the Leaf Eater Advanced™ into position through the screw slots provided. Ensure appropriate screws and anchors (if required) are used. (figure 5)
  5. Insert the Clean Shield™ screen into the Leaf Eater Advanced™. Ensure the Clean Shield™ screen is sitting firmly in place and check installation is secure. (figure 6).
Leaf Eater Advanced Installation

Horizontal (Rear Outlet) Installation

  1. Using the quick release tabs remove the Clean Shield™ screen by lifting it up and then out. (Figure 2)
  2. Swivel the outlet to the horizontal position – some force may be required.
  3. Position the Leaf Eater Advanced™ next to existing pipework, mark and cut top and bottom cut lines as per figure 4 . Ensure the cut edge is clean and smooth.
  4. Insert the Leaf Eater Advanced™ by sliding the rear outlet into the horizontal pipe. The back fixing plate must sit behind the top section of downspout. (figure 3)
  5. Screw the Leaf Eater Advanced™ into position through the screw slots provided. Ensure appropriate screws and anchors (if required) are used. (figure 5)
  6. Insert the Clean Shield™ screen into the Leaf Eater Advanced™. Ensure the Clean Shield™ screen is sitting firmly in place and check installation is secure. (figure 6)


Leaf Eater Advanced Rain Head Sizes:
  • 3" Round - Part Number RHAD99
  • 2"x3" / 3"x4" Rectangle Dual Fit - Part Number RHLB90

In Stock Part #

This Item is in stock from one of our Nationwide locations. This particular part # does not ship directly from the manufacturer. You may see a slightly higher price than the one listed straight from the manufacturer. This is due to the slight addition of freight incurred when shipping truckloads to our stores. You can always order the tank shipped straight from the manufacturer, but this will more than likely add a few weeks to your arrival time. With summer being the busy season manufacturers tend to get behind this time of year. We try to stay a step ahead for our customers by stocking popular tanks in our yards for such occasions. If a few dollars more will save you a month or so on your delivery time, we'd like to give you that option. You can always give us a call at 866-310-2556 to discuss your options further. We strive to meet customer expectations daily and continue to ask for your support.These tanks are offered on a first-come first-served basis only. *Stock Quantity is in real time and subject to change on a moment's notice.


 

made in the usa