300 Gallon Sphere Pump Tank
|Part Number: ||9515-N-41319|
|Capacity: ||300 Gallons|
|Dimensions: ||54" dia x 54"H|
|Qty. In Stock:||6|
|Ships From: ||Fort Worth, TX |
*Stock subject to change. Please call to confirm.
- Non Plumbed Tank (Tank does not come pre plumbed)
- 20" Manway with watertight lid
- Pump stand molded into the bottom
Important Note: Tank may be completely drained & left in the ground empty. No water is required during backfill.
Disclaimer: Tank is for below ground use only.
Across the United States there are a number of health code requirements that our tanks
must meet. These codes are regulated by the state, or county where you are located. To aid you in determining
which tank you need, please consult with your local health department.
Septic Tank Standards:
- Rotationally molded, one-piece, seamless, watertight tank.
- Polyethylene is unaffected by soil chemicals, sewage gases.
- Polyethylene tanks will not rust or erode.
- Strict quality guidelines ensure an environmentally safe septic tank.
- Riser extensions not included.
- Great item for shipment; indestructible.
- Height to the inlet 44".
- Height to the outlet 42".
FAQs About Septic Tanks
Q. Can I install a septic tank under a driveway?
A. No, installing the plastic septic tank under a driveway is not permitted and will void the warranty. Do not locate tanks beneath driveways or in the pathway of heavy or vehicular traffic areas.
Q. Is there a sand/gravel mixture recommended for bedding/backfill?
A. Yes, the sand/gravel mixture, commonly called “pea gravel” mixture is recommended. (See Installation Instructions Above)
Q. Can I use a septic tank above ground?
A. Underground plastic septic tanks are designed for below ground use only. Using the tanks above ground can result in deformation of the tank. It is far more cost-effective to utilize an above ground storage tank that is specifically designed for above ground use and applications.
Q. Can hot water be stored in plastic septic tanks?
A. Do not subject the tank to water temperature higher than 100 deg F. Polyethylene storage tanks have a maximum storage temperature of 120 deg F. Contents with a temperature in excess of 120 def F, even for a short period of time, can weaken the tank’s structural integrity and make it susceptible to deformation and failure.
Q. How do you access underground plastic septic tanks?
A. Each plastic septic tank comes equipped with manhole access hatches (1 or 2 depending on tank). In addition, risers can be added to the top of the tank providing ground level access. Without a riser you would need to dig up the soil above the manway to gain accessibility.
Q. Can I pick up a plastic septic tank nearby?
A. In many cases yes. To pick up a plastic septic tank and save on freight, requires you placing your order. Upon being notified that the tank is ready for pick-up, Plastic-mart will provide you with a 6 digit trip # which allows you go and pick up your tank M-F 8:30 am - 2:00 pm. Plastic-mart and the local manufacturers appreciate the opportunity to provide local pick up and the cooperation required for the process to be efficient.
This tank is manufactured with both a flat inlet/outlet and a recessed inlet/outlet for shipping purposes. The manufacturer ships at their discretion as to which tank you may receive.
In Stock Part #
This Item is in stock from one of our Nationwide locations. This particular part # does not ship directly from the manufacturer. You can always order the tank shipped straight from the manufacturer, but there is a chance this will add a few weeks to your arrival time. We try to stay a step ahead for our customers by stocking popular tanks in our yards for such occasions. You can always give us a call at 866-310-2556
to discuss your options further. We strive to meet customer expectations daily and continue to ask for your support. These tanks are offered on a first-come first-served basis only.
*Stock Quantity is in real time and subject to change on a moment's notice.
|Dimensions||54" dia x 54"H|
|Manufacturer Warranty (years)||3|
|Shipping From||Fort Worth, TX|
|Shipping Weight (lbs)||124|