Rain Catcher

The Rain Catcher is a versatile rain head that can either be used to:

The Rain Catcher is a great value product incorporating two internal screens. One that prevents leaves and debris entering pipes and the other provides a mosquito proof barrier.

1. Cut the downspout off 3" from the underside of the gutter, and remove.
2. Replace and re-fit the existing downspout with 3" or 4" Schedule 40 PVC pipe, allowing 9" from the underside of the gutter to the top edge of the elbow.
3. Fit and bracket the remaining downspout to the wall.
4. Place the fine mesh screen into the Rain Catcher, then place the larger screen on top of it.
5. Place the Rain Catcher into line with the downspout and push the unit down onto the elbow.

1. Make sure the position of the Rain Catcher is a minimum of 4 feet above the inlet to the water storage tank.
2. Cut a section out of the downspout in the desired position and fit a standard coupling to the lower end. Allow 6" between the TOP of the coupling and the top downspout.
3. Place the fine mesh screen into the Rain Catcher, then place the larger screen on top of it.
4. Place the Rain Catcher into line with the downspout and push the unit down onto the elbow.