Holding Tank Pump-out Kit

Manufacturer Part
Easy installation pump-out kit that will allow to give maintainance to your tanks. Fittings are made out of durable, water tight and resistant materials. Recommended to purchase the kit along with the tanks to avoid extra shipping costs

Accuracy of the images may vary. Refer to the specifications table to ensure precision.

Holding Tank Pump-out Kit Features:

Installation instructions for the DT-30 holding tank pump out
  • Drill 3 Diameter Hole In Polyethylene Holding Tank (Use Hole Saw to drill the hole in the side of the tank).
  • Measure the tank dimensions From The Bottom Of Inside Of Tank To The Top Outside Of Tank.
  • Take The Dimension Less 6. This Is Length Of Pvc required For Pumpout.
  • Glue Foot And Bulk Head Fitting Onto Pvc (Use Primer Than Clear Cement Designed For Pvc).
  • Push 2 Uniseal Into 3 Diameter Hole.
  • Lubricate Outside Diameter Of Pvc Fitting With Liquid Soap.
  • Press Pvc Fitting Into 2 Uniseal

The Holding Tank Pump-out Kit is available for sale nationwide.

Technical Drawings
View Product PDF

Key Specs
Length 20"
Width 4"
Height 4"
Weight 5lbs
Manufacturer Trionic
Manufacturer Part Number DT-30
Warranty 1 years years
Shipping Height 4"
Shipping Length 20"
Shipping Weight 5lbs
Shipping Width 4"
Ship Class UPS