KP150M25 1X115V 25' Manual Submersible Pump
The Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and grey wastewater such as drainage and domestic effluents with particles up to 10 mm. The pump can be used as a portable unit or stationary installation inside and outside buildings.
KP150M25 1X115V 25' Manual Submersible Pump
The Grundfos UNILIFT KP is a vertical single-stage stainless steel submersible pump with discharge port and integrated 1-phase canned motor in insulation class F with thermal overload protection.
Features include:
- A suction strainer
- Carrying handle
- 6 m mains cable
- A semi-open impeller for 10 mm free passage suitable for pumping groundwater, surface water, rain water and similar liquids.
- A double shaft seal consisting of two lip seals with grease in-between.
The pump has an outer casing ensuring continuous cooling of the motor by the pumped liquid. The rotor shaft operates in two maintenance-free carbon bearings cooled by the pumped liquid. The motor is filled with a non-toxic motor liquid.
Choose the Grundfos UNILIFT KP submersible pump for your water pumping needs, "Getting water on demand has never been easier."
| Dimensions | |
| Length | 5.8" |
| Width | 5.8" |
| Height | 8.9" |
| Weight | 15lbs |
| Inlet | 1.25" |
| Key Specs | |
| Manufacturer | Grundfos |
| Material | Stainless Steel |
| Max Temperature | 50° C/ 122° F |
| Shipping Height | 9" |
| Shipping Length | 6" |
| Shipping Weight | 15lbs |
| Shipping Width | 6" |
| Ship Class | UPS |
| NMFC Code | 93662 |
