KP350-M-1 1X115V 60HZ USA 25FT Submersible Pump
The Grundfos UNILIFT KP are stainless steel submersible pumps designed for pumping non-aggressive water and grey wastewater such as drainage and domestic effluents with particles up to 10 mm. The pump can be used as a portable unit or stationary installation inside and outside buildings.
KP350-M-1 1X115V 60HZ USA 25FT Submersible Pump
The Grundfos UNILIFT KP is a vertical single-stage stainless steel submersible pump with discharge port and integrated 1-phase canned motor in insulation class F with thermal overload protection.
Features include:
- A suction strainer
- Carrying handle
- 6 m mains cable
- A semi-open impeller for 10 mm free passage suitable for pumping groundwater, surface water, rain water and similar liquids.
- A double shaft seal consisting of two lip seals with grease in-between.
The pump has an outer casing ensuring continuous cooling of the motor by the pumped liquid. The rotor shaft operates in two maintenance-free carbon bearings cooled by the pumped liquid. The motor is filled with a non-toxic motor liquid.
Choose the Grundfos UNILIFT KP submersible pump for your water pumping needs, "Getting water on demand has never been easier."
Key Specs | |
Inlet | 1.25" |
Max Temperature | 50° C/ 122° F |
Dimensions | |
Length | 5.8" |
Width | 5.8" |
Height | 9.2" |
Weight | 18lbs |
General | |
Material | Stainless Steel |
Manufacturer | Grundfos |
Manufacturer Part Number | 013DC201 |
Shipping Height | 10" |
Shipping Length | 6" |
Shipping Weight | 18lbs |
Shipping Width | 6" |
Ship Class | UPS |