Poly Welding Rod Nat - 30'

Instructions for use:

1. Remove damaged item from cold and windy conditions.
2. Preclean damaged area.
3. Preheat welding gun for 15 minutes.
4. V-grind out damaged area, 1/2 to 3/4 deep of the material thickness.
5. Preheat damaged area to well above room temperature.
6. Insert wire in preheat tube and allow wire to become clear/molten.
7. Place tip on crack and slowly proceed with repair, gradually pushing wire through tube.
8. Return to starting point and heat to a smooth glaze for proper bonding.
9. For deeper grooves, a second pass may be necessary.