Repair Gun With 30' of Natural Poly Rods

60221-POLY WELDING GUN ROD-TK REPAIR KIT

The tank repair kit pictured includes a specially formulated welding wire containing copolymers and adhesives. Wire may be used to effectively repair linear polyethylene. Easy to use and requires only 110 volt power.

Instructions for use:

1. Remove damaged item from cold and windy conditions.
2. Pre-clean area to be welded.
3. Preheat welding gun for 10-15 minutes.
4. V-notch out damaged area, 1/2 to 3/4 of the material thickness.
5. Preheat damaged area well above room temperature.
6. Insert wire into preheat tube and allow wire to become clear/molten.
7. Place tip into v-notched crack and slowly proceed with repair, gradually feeding wire through the tube as you go.
8. Return to starting point and heat to a smooth glaze for proper bonding.
9. For deeper grooves, a second pass may be necessaryto ensure a good seal.