1550 Gallon Vertical Double Wall HDLPE Liquid Chemical Storage Tank in White 1.9 S.G.
This industrial grade chemical containment tank is primarily used for chemical storage in commercial and industrial applications. This double wall tank acts as a tank within a tank. The outer natural white tank provides 110 to 120% containment for the internal tank. These are a few of the liquids and chemicals this tank is commonly used for: biodiesel, brine, calcium chloride, diesel exhaust fluid, fertilizer, polymer, sodium hydroxide, urea, and waste water.
1550 Gallon Vertical Double Wall HDLPE Liquid Chemical Storage Tank in White 1.9 S.G.
Features Include:
- 18 Threaded Manway Comes Standard (Bolted and Threaded Manways are available in sizes up to 24" by request.)
- Molded In Tie-Down Lugs (interface with optional cable restraint system to meet seismic and 150 mph wind load requirements.)
- Provides 115%-120% containment of inner tank's capacity.
- Resin complies with U.S. Food and Drug Administration regulation 21 CFR 177.1570 (c) 3.1 and 3.2.
- Through tank fittings available by request.
- Outer containment of the double wall tank complies with federal regulation 40CFR-264.193 capacity requirements.
This tank is made from High Density Linear Polyethylene. It is also made in crosslinked linear polyethylene by request.
Optional Fittings Include:
- Flanged Outlets (Can be securely fastened and sealed to many of the large flat areas located on the top section of the tank.
- Fill and/or Draw Pipe Assemblies (can be installed to facilitate different material loading or un-loading requirements.)
- U Vent Assemblies (available in a variety of sizes to relieve vacuum pressures.)
- U.F.O. (Unified Fitting Outlet)(uniquely designed to mechanically seal fitting outlet through both the inner and outer tank walls. Material unloading is easier and more cost effective than pumping contents from the top of the tank.)
- OSHA Approved ladders are available with and without cages in fiberglass and steel construction.
- Double Wall Tank Construction encloses and interlocks outer and inner tank to prevent rain, snow, and debris from entering outer containment tank.
Captor Double Wall liquid storage tanks can not be pressurized. This double wall liquid storage tank can hold liquids with a material weight up to 15.83 lbs. per gallon (1.9 specific gravity rating). (Water weighs 8.34 pounds)
Key Specs | |
Diameter | 76" |
FDA Approved | Yes |
Gallon Capacity | 1550 |
Lid Size | 18" |
NSF / ANSI 61 Approved Resin | Yes |
Specific Gravity | 1.9 |
Dimensions | |
Length | 76" |
Width | 76" |
Height | 136" |
Weight | 970lbs |
General | |
Material | High Density Linear Polyethylene |
Manufacturer | Snyder Industries |
Manufacturer Part Number | 5490000N45 |
Color | White |
Warranty | 3 years |
Shipping Height | 76" |
Shipping Length | 136" |
Shipping Weight | 970lbs |
Shipping Width | 76" |
Ship Class | OVS |