1250 Gallon Plastic Two Compartment Septic Tank with Loose Plumbing and Low Profile Design - IAPMO Certified
1250 Gallon Low Profile Septic Tank - Loose Plumbing
Two Compartment Septic Tank is commonly used in residential and commercial settings for effective wastewater management, separating solids and liquids to facilitate waste decomposition and prevent environmental contamination. Norwesco low profile septic tanks are molded in one piece. requiring no additional assembly. reducing installation time and effort.
- Loose Gaskets & Tees (see video below for install assistance)
- Rotationally molded rugged. one-piece tank with no seams to leak.
- No special backfill or water filling required during installation.
- May be pumped dry during pump-outs.
- May be installed with 6" to 36" of cover.
- Suitable for use as a septic tank or pump tank and may also be used for non-potable water.
- Access openings and lids accept Norwesco manhole extension. double-wall corrugated pipe and ribbed PVC pipe.
Disclaimer: Tank is for below ground use only.
Across the United States there are a number of health code requirements that our tanks must meet. These codes are regulated by the state. or county where you are located. To aid you in determining which tank you need. please consult with your local health department.
Installation Video:
Key Specs | |
FDA Approved | No |
Gallon Capacity | 1250 |
Lid Size | 20" |
Max Temperature | 130 F / 54 C |
Outlet | 4" |
Pressurized Use | No |
Dimensions | |
Length | 157" |
Width | 60" |
Height | 51" |
Weight | 417lbs |
General | |
Material | Polyethylene |
Manufacturer | Norwesco |
Manufacturer Part Number | 43503 |
Color | Green |
Warranty | 5 years |
Shipping Height | 51" |
Shipping Length | 157" |
Shipping Weight | 417lbs |
Shipping Width | 60" |
Ship Class | OVS |