Snyder 1550 Gallon Vertical Double Wall XLPE Liquid Chemical Storage Tank in White

SKU
SII-5490000N42
Manufacturer Part
5490000N42
$8,645.00

This industrial grade chemical containment tank is primarily used for chemical storage in commercial and industrial applications. This double wall tank acts as a tank within a tank. The outer natural white tank provides 110 to 120% containment for the internal tank. These are a few of the liquids and chemicals this tank is commonly used for: biodiesel, brine, calcium chloride, diesel exhaust fluid, fertilizer, polymer, sodium hydroxide, urea, and waste water.

Accuracy of the images may vary. Refer to the specifications table to ensure precision.

Snyder Industries 1550 Gallon Vertical Double Wall XLPE Liquid Chemical Storage Tank in White

The Snyder Industries 1550 Gallon Vertical Double Wall XLPE Liquid Chemical Storage Tank in White offers robust, dual-layer protection for safely storing chemicals and other liquids. Constructed from cross-linked polyethylene (XLPE), it features an 18" threaded vented manway and a 2" outlet, with a specific gravity rating of 1.9, making it suitable for a wide range of applications. This tank complies with FDA standards and NSF/ANSI 61, ensuring safe use for potable water and chemical storage. 

  • Molded In Tie-Down Lugs (interface with optional cable restraint system to meet seismic and 150 mph wind load requirements.)
  • Provides 115%-120% containment of inner tank's capacity.
  • Resin complies with U.S. Food and Drug Administration regulation 21 CFR 177.1570 (c) 3.1 and 3.2.
  • Through tank fittings available by request.
  • Outer containment of the double wall tank complies with federal regulation 40CFR-264.193 capacity requirements.

This tank is made in crosslinked linear polyethylene.

Optional Fittings Include:

  • Flanged Outlets (Can be securely fastened and sealed to many of the large flat areas located on the top section of the tank.
  • Fill and/or Draw Pipe Assemblies (can be installed to facilitate different material loading or un-loading requirements.)
  • U Vent Assemblies (available in a variety of sizes to relieve vacuum pressures.)
  • U.F.O. (Unified Fitting Outlet)(uniquely designed to mechanically seal fitting outlet through both the inner and outer tank walls. Material unloading is easier and more cost effective than pumping contents from the top of the tank.)
  • OSHA Approved ladders are available with and without cages in fiberglass and steel construction.
  • Double Wall Tank Construction encloses and interlocks outer and inner tank to prevent rain, snow, and debris from entering outer containment tank.

Captor Double Wall liquid storage tanks can not be pressurized. This double wall liquid storage tank can hold liquids with a material weight up to 15.83 lbs. per gallon (1.9 specific gravity rating). (Water weighs 8.34 pounds)


Key Specs
Diameter 76"
FDA Approved Yes
Gallon Capacity 1550
Lid Size 18"
NSF / ANSI 61 Approved Resin Yes
Outlet N/A
Shape Double Wall
Specific Gravity 1.9
Dimensions
Length 76"
Width 76"
Height 136"
Weight 970lbs
General
Material Cross Linked Polyethylene
Manufacturer Snyder Industries
Manufacturer Part Number 5490000N42
Color White
Warranty 3 years
Disclaimers Our Crosslink Polyethylene is not approved for potable water storage.
Shipping Height 76"
Shipping Length 136"
Shipping Weight 970lbs
Shipping Width 76"
Ship Class OVS